Quick Guide: Fixing Burnt Vape – Step-by-Step Solutions

Having burnt vape issues is nothing new, but do you know how to fix burnt vape?

You first need to change how you vape to fix the burnt vape troubles. Then clean the vape tank and change the coil. Moreover, to ensure the burnt vape is fixed, you must also prime the coils properly.

Source: VapeDeal

Want to know more about what causes the burnt vape issues and how you can tackle these challenges? If yes, then read on till the end of the blog.

Experience the difference with Elf Bar! No more burnt tastes, just smooth, flavorful clouds every time. Are you ready for an easy, enjoyable vaping journey?

Causes for a Burnt Hit from Your Vape

Burnt hits happen when you turn on an atomizer with insufficient juice on your vape wicks. Without vaporizing liquid, the coils will start burning the wick, and you’ll inhale burned cotton. Below are a few of the common reasons for burnt hits and ways you can tackle the problem.

Not Priming the Coil

This seems to be the most common problem. Priming your coil heads means getting them ready for the first time you use them by letting the wicks soak up e-liquid. Remember to always prime your coils properly so you don’t get a burnt hit.

Lots of Watts

If you vape at too high wattages, the e-liquid will evaporate too quickly. When this occurs, your coils might burn off your wicks, even if there is still juice in the tank. Therefore, it’s recommended to always stick to the suggested wattage.

Chain Vaping

When you’re chain vaping, taking many puffs at once, the wick tends to dry out faster. You’ll know a burnt hit is imminent when your vape starts to taste slightly burnt. In such situations, it’s beneficial to let your vape rest a bit, allowing the liquid to replenish the dry areas of your wick. But if you’re seeking a superior solution, consider the best vapes for chain vaping, designed to handle intense use without compromising on taste.

High-VG e-liquids

There are certain vape tanks that can use high-VG liquid, but most of the time, others need around 50% or more PG to work right. Therefore, checking the wick size openings is a good rule of thumb.

Ways to Fix a Burnt Vape

In this section, I’ll let you know some of the best ways to easily get your burnt vape fixed. So, make sure not to skip any of the following segments.

Change Your Vaping Method

The way you vape can sometimes cause a burnt taste. If you take long, fast hits, the wick might not have enough time to get wet again, which can lead to burnt hits.

Instead, take shorter, slower puffs to give the coil enough time to pull the e-liquid through it. This method allows the coil to get more e-liquid, which can help keep it from burning.

Clean the Tank

If the taste is burnt, you must take the tank apart and clean it. Start by taking out any leftover e-liquid from the tank. Then, take the tank apart according to the directions from the manufacturer.

Take off the coil, any o-rings, and any other parts that come off.

Rinse each part under warm water to eliminate any gunk or dust. If you need to, use a soft brush (like a toothbrush) to scrub away any residue that won’t come off gently.

Don’t use harsh chemicals or rough materials on the tank because they could hurt it. After cleaning, ensure each part is arid before putting the tank back together.

Change the Coil

The coil is probably to blame if the burnt taste stays even after cleaning. Most vaping devices have coils that can be changed and bought individually. Look for coils that work with your tank, and then buy a new one.

Follow the directions from the manufacturer to put the new coil in the right way. Usually, you unscrew the old coil from the base of the tank and put the new one in. Make sure that the coil fits well but is not too tight.

Get the Coil Primed

Priming the coil ensures the heating works right and avoids dry hits. Find the holes in the new coil where the cotton wick is visible. Pour a few drops of e-liquid into each hole so that the cotton is completely soaked.

Be careful not to soak too much, which can cause floods or leaks. Once the cotton is wet, put the tank back together and let it sit for a few minutes so the e-liquid can soak the coil fully. This step is very important if you don’t want the coil to burn out too soon when you start vaping.

Change the Power

Some vapes let you change the wattage or temperature. If yours has these features, make sure they are set up right for the recommended range of your coil.

Start with a lower wattage or temperature setting and slowly raise it until you find the best flavor and vapor production mix. High power or temperature can quickly lead to burnt hits, so finding the right setting is important.

Check the Battery and Connections

Make sure your battery is fully charged and firmly connected to the device. Loose links can make it hard to get the right amount of power and could lead to burnt hits.

If you need to, use a soft cloth to clean the battery contacts to get rid of any dirt, debris, or rust. This makes sure the link works and keeps problems from happening.

Check the Quality of Your e-liquid

The quality of your e-liquid has a big impact on your smoking experience as a whole. E-liquids that aren’t fresh or have gone bad can taste bad and cause burnt hits. Make sure you are using fresh e-liquid from a trusted source.

Check the date on the bottle and throw away any e-liquids that are too old or that you aren’t sure about. Also, ensure that the VG/PG mix of the e-liquid is right for your device, as this can affect how the wicking works.

Bottom Line

So, after going through this blog, we believe you should now be able to fix your burnt vape. Yet, there are times when it can get complicated and confusing. So, unless you know the ins and outs, it’s always recommended that you take the vape to an expert for a perfect and error-free fix.

The following two tabs change content below.

Martin B.

Ex-smoker, passionate vaper who loves to tell the world about the life-changing potential of vaping. Co-creator of Ecigclopedia with a background in Business & Finance. Prefers a dessert flavored vape and loves to innovate.

Martin B.

Ex-smoker, passionate vaper who loves to tell the world about the life-changing potential of vaping. Co-creator of Ecigclopedia with a background in Business & Finance. Prefers a dessert flavored vape and loves to innovate.

Leave a Reply

Your email address will not be published. Required fields are marked *